Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Yonkers Homeowners
A broken garage door in Yonkers usually announces itself in one of three ways: a snapped spring, a door stuck halfway down, or an opener that hums but won’t lift. Whichever one you’re facing, the answer is the same – a technician who has actually worked on your brand and can tell you what failed before quoting a fix. Same-day service is available for most repairs in Yonkers, and our technicians have up to 15 years of experience on residential door and opener systems. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, and we quote the price before any work begins. Call (833) 690-5368 and we’ll get a technician to your door.

What Our Garage Door Repair Service Includes
Garage door repair covers the mechanical parts that move the door and the electrical parts that tell it when to move. When we diagnose a door in Yonkers, we check the whole system rather than just the part that failed, because a bad roller can wear a hinge and a misaligned track can strain an opener motor. Here’s what each part of the service involves.
Panel Replacement
Panels are the sections of the door itself, and they take the impact when a car backs into the opening or a heavy object knocks the door off its line. You need panel replacement when a section is dented, cracked, or bent enough that the door doesn’t sit flush at the floor. We match panel style and color for common manufacturers, and we tell you honestly when a single panel swap makes sense and when damage has spread too far for one section to fix.
Spring Repair
Springs are the coiled steel that counterbalances the door’s weight, and a broken torsion spring or stretched extension spring means the door suddenly feels impossibly heavy or refuses to close. This is one of the highest-risk repairs on the entire door, and it’s not something homeowners should attempt – a wound torsion spring is under heavy tension, and releasing it incorrectly causes serious injury. We treat spring repair as its own dedicated service, using the correct winding bars and load math for your door’s weight and size. A garage door spring repair in Yonkers typically runs $180 – $340 for one spring, and a matched pair is usually replaced together at about twice that.
Cable Repair
The lift cables run from the bottom brackets to the drums and keep the door level on both sides. They fray, kink, or snap when a spring fails or a door gets forced, and a damaged cable can let one side of the door drop. You’ll notice a snapped cable as a loose wire hanging near the track or a door that lifts unevenly. Cables carry the same tension as springs, so we replace them as a pair and inspect the drums and brackets at the same time.
Track Realignment
Tracks are the metal rails the door rides in, and they bend when the door is struck, when a roller derails, or when the framing shifts. A bent track produces scraping, jerking, and gaps at the sides that let weather and pests in. We straighten or reset tracks so the door travels smoothly, and we check the mounting points to make sure the rails stay in alignment once we’ve fixed them.
Roller Replacement
Rollers are the small wheels guiding the door through the track, and they wear down with every open and close. Worn rollers rattle, squeal, or crumble, and a seized roller drags on the opening and shortens the life of everything around it. We replace rollers with the correct type for your track profile and inspect the hinges and bearings for the same wear.
Sensor Calibration
The safety sensors are the two small eyes near the floor that stop the door if something crosses the beam. When they get knocked out of line, dirty, or the wiring loosens, the door reverses or won’t close at all. This is often a quick fix, but the sensors need precise alignment to work reliably. We calibrate them and test the reversal every time, so you’re not left with a door that behaves unpredictably.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
Homeowners in Yonkers own a wide spread of door and opener brands, and the brand matters when it comes to parts, wear points, and how the system is built. We work on LiftMaster openers, including the belt and chain drive models and the Wi-Fi-connected units where the wall control and motor need to talk to each other. We also service Craftsman and Genie equipment, which many older Yonkers homes still run. Those units have their own quirks: Craftsman openers can lose their travel settings after a power flicker, and Genie models often need the limit switches reset rather than a full replacement. Knowing where a brand typically fails saves you the cost of guessing.
On the door side, we handle Wayne Dalton doors and their unique torsion systems, which use a different spring setup than most other makes. We also work on Raynor and Clopay doors, along with Amarr and Chamberlain openers, so we’ve seen the common failure points across all of them. Our technicians are trained to service these 8 brands, which means they diagnose the system you already have instead of pushing you toward a brand they’d rather sell. Whether you have Wayne Dalton or any other make, we can help.
Signs You Need Garage Door Repair Right Now
Some garage door problems can wait a few days. Others shouldn’t. Here are the signals that mean it’s time to stop using the door and get it looked at.
- A loud bang from the garage and a door that won’t lift. That’s usually a snapped torsion spring. The door becomes dead weight, and forcing the opener will burn the motor out or snap a cable.
- The door reverses or won’t close all the way. This points to sensor trouble or a misaligned track. A door that won’t close is a security gap for the whole house.
- The door hangs crooked or one corner sags. That’s a cable or spring problem on one side. Running the door in this state can bend tracks and stress the opener.
- Grinding, scraping, or squealing as the door moves. Worn rollers, dry hinges, or a bent track. Left alone, an inexpensive roller swap turns into a bigger track repair.
- The opener runs but the door doesn’t move. A stripped gear, a broken carriage, or a snapped cable. The motor is fine but it isn’t connected to anything that moves.
Our Garage Door Repair Process – Step by Step
- 1
Diagnosis on arrival. We start by testing the door by hand and with the opener to see how the system behaves under load. We check spring tension, cable condition, roller wear, and track alignment so we’re fixing the cause, not just the symptom.
- 2
Written price before work. You get a clear estimate with the parts and labor itemized. We explain what failed and why, and you agree to the price before a single tool is picked up. If the problem is something we can adjust instead of replace, we tell you that.
- 3
Repair with the right parts. Our technicians carry the tools for the brands we service and match replacement parts to your door’s weight, size, and track type. Springs are matched to the door load, and cables are replaced in pairs.
- 4
Testing and adjustment. After the repair, we cycle the door multiple times and set the opener’s travel limits and safety reversal. We check the balance so the door lifts with one hand and stays put at the halfway point.
- 5
Walkthrough before we leave. We show you what we fixed, test the safety sensors with you watching, and note anything that might need attention later. If a full replacement would make more sense than another repair, we say so honestly.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Yonkers?
A garage door repair in Yonkers typically runs $150 – $600, depending on what failed and how many parts are involved. A typical cable repair runs $130 – $250. A typical opener repair runs $120 – $320, and an opener installation runs $250 – $550. Panel replacement runs $250 – $500. Track realignment runs $120 – $240, roller replacement runs $110 – $220, and spring repair runs $180 – $340 for one spring. A new door installation, if the door is beyond repair, runs $700 – $2200.

What affects the price: the number of parts involved, the brand and age of the door, whether the opener needs reprogramming, and whether the door’s framing needs adjustment. A single roller replacement is on the low end; a snapped spring plus a frayed cable plus a bent track pushes toward the high end.
How to avoid overpaying: get the estimate in writing first, and ask what’s included. Our estimate covers the diagnostic, the parts, the labor, and the post-repair testing. We don’t add charges after the work starts – the written estimate sets the final price. The estimate itself is free, and it’s your chance to ask the questions you need to ask. For a detailed look at all our services, see Garage Door Repair Yonkers Pros.
Garage Door Repair Near Yonkers – Our Service Area
We connect homeowners in Yonkers and the surrounding towns with local technicians who know the door systems common to Westchester and Rockland. That includes garage door repair in Blauvelt, Pearl River, Valley Cottage, Nanuet, Chestnut Ridge, Ossining, Congers, Spring Valley, Bronxville, and Tuckahoe. Response times vary by location and time of day, but we move quickly on urgent calls. We can also help with garage door repair in Pearl River and nearby towns.
Serving Yonkers, NY – Our Local Coverage Area
We serve Yonkers and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Yonkers
Garage door repair covers any fix to the moving or electrical parts of an existing door: springs, cables, rollers, tracks, panels, and sensors, plus the opener motor and its controls. It doesn’t include a full new door install, which is a separate job. If your door is damaged but the structure is sound, repair is usually the faster and less expensive route.
Most repairs take one to three hours once a technician is on site. A spring swap or roller replacement is on the shorter end; a cable repair plus track realignment or a multi-panel replacement takes longer. We can often give you a time estimate when you call, so you know what the day looks like.
Typical repairs run $150 – $600, with the final price depending on the parts involved and the door’s condition. Spring repair is $180 – $340 for one spring, and a pair is about twice that. You get a written estimate before work begins, and that estimate is the price you pay. Call (833) 690-5368 for an exact quote – estimates are free.
Yes. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. Our technicians are trained on these 8 brands, which means they know the failure points specific to your system. You don’t need to replace a brand you like just to get it fixed.
Yes. Emergency garage door service is a core part of what we offer, not an add-on. If your door is stuck open, off its track, or locked you out of the garage, call (833) 690-5368 and we’ll work to get a technician out to you. We’re available for urgent situations beyond standard hours.
We stand behind the work and will tell you what’s covered when you get your estimate. Parts carry their own manufacturer coverage, and if something we fixed acts up, get in touch and we’ll take a look. Ask about warranty terms when you call so you have it in writing.
Clear the floor area inside the garage and the driveway in front of the door so the technician has room to work. Move anything stored against the tracks, and if you have pets, secure them in another room. Have your opener remote and wall control accessible, and tell us about any recent symptoms so we can bring the right parts.
Schedule Your Garage Door Repair Service in Yonkers Today
Don’t force a stuck door or live with a garage you can’t secure. Call Garage Door Repair Yonkers Pros at (833) 690-5368 for a free, no-obligation estimate. We work on the brand you own, quote the price before any work starts, and offer emergency service for urgent situations. Let’s get your door moving again.
Written by the team at Garage Door Repair Yonkers Pros.